Anti-Luce Fasteners: Check the Fastener, Eyelet and Panel Fit Together

Anti-Luce hardware is often considered as a fastener and eyelet together. Before ordering, check how the selected parts will meet the door and frame, what the mounting surfaces are made from, and how the fastener is intended to be installed.

This guide helps you prepare a product enquiry. It does not provide a fabrication drawing or certify a door, trailer compartment or closure for security, transport restraint or load-bearing use.

Identify the parts separately

DuraSlide lists zinc-plated Anti-Luce fasteners, stainless steel Anti-Luce fasteners and an eyelet plate for Anti-Luce fasteners. Those listings identify product categories and finishes; they do not by themselves establish that every fastener and plate form a compatible set.

Start with the DuraSlide Anti-Luce fastener collection, then compare the exact product records for the parts you intend to use.

Compare what the listings say

Check the door and frame before choosing

• Panel and frame material: identify both, including any coating or lining. The fastener descriptions say weld-on but do not identify compatible substrates or a welding procedure. Confirm this with the fabricator.
• Panel thickness and edge position: record them at the intended fixing point. Ask whether the chosen fastener and plate can be located there without interfering with the panel or surrounding structure.
• Meeting geometry: photograph the door closed and open. Record the gap, overlap, edge position and available space for both parts. Confirm the fastener engages the specified plate as intended.
• Finish and environment: describe expected exposure and maintenance. Zinc plating or the words “stainless steel” alone do not establish suitability for every environment; request the exact material and care information if it matters.
• Operation: confirm the intended way to open, close and release the hardware from the product instructions. Do not force a misaligned or binding assembly.

A product photograph can help identify a listing, but it cannot confirm scale or mating dimensions. Use a current drawing or obtain written confirmation for the exact parts.

Prepare a useful enquiry

Send DuraSlide the following information before asking which parts to use:

• Door and frame material, thickness and finish.
• Photos of the mounting area from the front, side and rear where accessible.
• Available space and the intended fastener/plate locations.
• The exact product links or names being considered.
• Whether you need weld-on installation and who will carry out the fabrication.
• Any drawing, existing part number or measurement from the hardware being replaced.

If you are planning the wider door, hinge and access arrangement, our trailer storage compartment guide covers those related decisions. It treats latching, locking and equipment restraint as separate requirements.

Common questions

Are zinc-plated and stainless Anti-Luce fasteners interchangeable?

The current listings describe different finishes, but they do not provide enough dimensional or installation information to confirm interchangeability. Compare the exact model details and ask for confirmation.

Does the eyelet plate come with a fastener?

The product title identifies an eyelet plate, but the current product record does not confirm package contents. Check the listing or ask DuraSlide before ordering.

Can I choose by panel thickness alone?

No. The fastener, eyelet, panel material, edge geometry, fixing space and installation method all need to be checked together.

Does this hardware provide a load rating or security rating?

No such rating is stated in the reviewed product information. Do not treat an Anti-Luce fastener as a rated transport restraint or security lock without specific documentation for the product and complete installation.