Choosing an Ultra Heavy-Duty Linear Slide: What to Record Before You Enquire

The Ultra Heavy Duty Linear Slide is a special-order product. Before enquiring about the DTS-40 listing, gather the details of the drawer and its operating conditions. A clear brief helps DuraSlide confirm which model information, drawing and supply options apply to your project.

This is an enquiry checklist, not a load calculation or installation design. Do not select a slide from a range-level capacity statement alone: request the current information for the exact length and mounting arrangement.

Describe the equipment drawer

Explain what the drawer will carry, how it will be accessed and whether it is part of a vehicle-based equipment fit-out. Include whether the platform remains stationary or moves with a vehicle, and describe ordinary operating conditions such as vibration, frequent cycling, impact risk, dust or moisture exposure. These details help the supplier understand the job; they do not establish suitability by themselves.

For broader planning, see our service-vehicle drawer fit, access and restraint guide. The slide is one component in a larger system, so the drawer, supporting structure, fixings and any separate retention requirements also need consideration.

Measure the full movement envelope

Record more than the drawer-box length. Measure the available bay, the closed space, the required outward travel and the clearance around the moving assembly. Note nearby doors, wiring, handles, equipment and surfaces that could obstruct extension.

• Available compartment depth and width.
• Drawer-box outside dimensions and the planned mounting surfaces.
• Required closed length and useful extension for the job.
• Clearance at full movement, including handles and surrounding equipment.

Use the measurements to ask which listed length and extension need further checking. The dimensions on a product listing do not replace the drawing for the selected model. Our replacement drawer-slide measuring guide explains how to record length, clearance and travel for an existing installation.

Explain the moving load and its distribution

Estimate the empty drawer mass, the heaviest planned contents and any equipment attached to the drawer. State where the load sits and whether it is evenly distributed or concentrated toward one end. If the load changes between uses, describe the expected range and the heaviest normal configuration.

Ask DuraSlide for the documented capacity and conditions for the exact model, length and orientation. Do not multiply a pair rating, transfer a figure from another length or assume that a headline range value covers an assembled vehicle drawer. The product listing includes length-specific examples, but the enquiry should confirm the current model data rather than infer values for unlisted variants.

Record the mounting arrangement

Attach a simple sketch or clear photos of the proposed side mounting surfaces. Show the slide orientation, available fixing area, support structure and how the drawer will stay aligned through its travel. If your design uses an unusual orientation, ask whether that arrangement is covered by the selected model's current instructions before building around it.

Also identify who will design and install the complete assembly. The product page does not supply enough information to specify every structure, fastener or vehicle fitment from a generic article.

Include these details in your enquiry

1. Application and what the drawer carries.
2. Empty and maximum moving mass, with approximate load distribution.
3. Available bay dimensions, closed length and travel required.
4. Mounting orientation, supporting material and fixing area.
5. Operating conditions, including vehicle movement and exposure.
6. Quantity, preferred length or variant, and photos or a dimensioned sketch.

Then ask which exact model and drawing should be reviewed, what documented capacity applies to that configuration, whether the arrangement is supported, and what current special-order price and supply timing are available. The product page states that the Ultra Heavy Duty Linear Slides are special order only and provides a price enquiry route. Confirm availability and timing directly rather than assuming an online variant is ready to ship.

Where to send the brief

Review the Ultra Heavy Duty Linear Slide product page and send your dimensions, load description and mounting sketch through the DuraSlide contact page. Keep a copy of the response and the model-specific drawing with the project records.

The generated hero is illustrative and does not depict an actual customer vehicle, tested load, or installation of the DTS-40 model.